Intelligent Edge
Hardware

DIN-rail hardware that runs locally, connects instantly via QR scan and integrates any third-party device over Modbus or DALI.

Main Controller

Bisly UM8 Pro

• 8 relay outputs (4× SPST + 4× SPDT), 250 VAC 16 A
• 3 × RS-485 + Ethernet + 1-Wire bus
• 8 digital inputs, 4 analog inputs, 4 PWM outputs

Datasheet [PDF]Declaration of Conformity [PDF]

Phase-Cut Dimmer

UM6D 6-Channel

• 6 × 240 W independently dimmable channels
• Leading/trailing edge. Software selectable
• 6 digital inputs for impulse switches

Datasheet [PDF]Declaration of Conformity [PDF]

Compact Dimmer

UMD 2-Channel

• 2 × 220 W phase-cut dimming channels
• Fits 68 mm electrical backbox (behind switch)
• 2 digital inputs + 1-Wire bus for temp sensors

Datasheet [PDF]Declaration of Conformity [PDF]

DALI Controller

UDB DALI Bridge

• DALI-1 and DALI-2 compatible
• 130 mA bus. Up to 64 DALI luminaires
• RS-485 interface to Bisly UM8 Pro

Datasheet [PDF]Declaration of Conformity [PDF]

Multifunctional sensors that measure air quality, presence and temperature. Giving the system the data it needs to act autonomously.

Multi-Sensor

UMS Supersensor

• CO₂, VOC, humidity & air temperature
• PIR presence detection (4 m radius)
• 0.1–30,000 lux + color temperature

Datasheet [PDF]Declaration of Conformity [PDF]

Ventilation Sensor

UMS Air

• Installed in mechanical ventilation duct
• CO₂, VOC, humidity, temperature
• RS-485 interface to Bisly UM8 Pro

Datasheet [PDF]Declaration of Conformity [PDF]

Temperature Sensor

1-Wire Temp Sensor (Air)

• ±0.5 °C accuracy (−10 to 85 °C)
• Mounts in standard lighting switch socket
• 1-Wire daisy-chain. Up to 20 per bus

Datasheet [PDF]

Floor Sensor

1-Wire Temp Sensor (Floor)

• ±0.5 °C accuracy for floor temperature
• Available in 1.5 m, 3 m and 5 m lengths
• 1-Wire daisy-chain. Up to 20 per bus

Datasheet [PDF]

Dedicated wall touchscreens powered over Ethernet. No separate power wiring. And they always run the latest Bisly interface.

10.1" Touch Panel

Bisly Hub 2

• 10.1" IPS, 1200 × 1920 FHD, 250 cd/m²
• Android 14 with 5-point capacitive touch
• PoE 802.3af. Single cable for power & data

Datasheet [PDF]Declaration of Conformity [PDF]

Pre-configured networking layer for Bisly deployments. Server, router and switches that ship as a tested, isolated stack ready to run on day one.

Building Server

Bisly House Server

• Standard: SuperMicro 5019D-FTN4 for multi-unit
• Compact: SuperMicro SYS-E200-9A for smaller homes
• Acts as the central unit for all on-site automation

Datasheet [PDF]Declaration of Conformity [PDF]

Pre-Configured Router

Bisly Router

• Plug-and-play. Works out of the box, no manual setup
• Isolated dedicated LAN for Bisly systems
• Hardens building automation against cyber threats

Datasheet [PDF]Declaration of Conformity [PDF]

USW-16/24/48-PoE

Network Switches

• 16, 24 or 48-port PoE switches (Ubiquiti USW)
• Per-port switching, mirroring, VLAN, aggregation
• Real-time topology, device metrics and health monitoring

Datasheet [PDF]

Declaration of Conformity (3 PDFs)

Native integrations with the access readers and IP intercoms most projects already specify, HID, HIKvision, Inception readers and 2N-Verso / IP Style intercoms.

Access Readers

HID Readers

• Cards, NFC, Bluetooth and Bisly mobile credentials
• Basic readers and keypad readers (PIN access)
• OSDP. Encrypted, two-way reader communication

Datasheet [PDF]

Declaration of Conformity (4 PDFs)

Access Readers

HIKvision Readers

• Native integration into the Bisly access layer
• Card and PIN credential support
• Centralised management alongside Bisly access modules

Access Readers

Inception Readers

• Multi-credential reader support out of the box
• Time-bound and one-time access codes per booking
• Driven from PMS or the Bisly Tenant App

IP Door Intercoms

2N-Verso & IP Style Intercoms

• Modular IP intercoms with Full HD camera + IR night vision
• PIN, NFC, Bluetooth, fingerprint and QR code entry
• SIP and ONVIF. Slot directly into Bisly access flows

Datasheet (2 PDFs)

Declaration of Conformity (2 PDFs)

Connect on-site IP cameras straight to the Bisly platform. Multi-vendor support across LTS, Hanwha, Bosch and HIKvision (including ANPR).

IP Cameras

Bosch IP Cameras

• Live feeds inside the Bisly building dashboard
• Same platform as access control. Single pane of glass
• Designed for multi-tenant and commercial portfolios

IP Cameras + ANPR

HIKvision IP Cameras

• HIKvision IP cameras for general surveillance
• HIKvision ANPR cameras for license-plate access
• Plate-driven gate and parking automation

IP Cameras

LTS IP Cameras

• Centralised live feed management
• Real-time monitoring for asset managers and tenants
• Seamless integration with the Bisly BMS

IP Cameras

Hanwha IP Cameras

• Hanwha enterprise IP cameras supported natively
• Same dashboard as access control and security
• Ideal for portfolio-wide visibility

Plug Bisly into the building's utility meters, heat, water, gas and electricity, over M-Bus for transparent per-unit billing.

M-Bus Converter

EthMBus-XL LITE

• DIN-rail M-Bus to Ethernet converter
• Up to 190 M-Bus slave devices per converter
• TCP/UDP or virtual COM port. Works over the LAN

Datasheet [PDF]Declaration of Conformity [PDF]